| Housing: Body and mounting plate are cast aluminum construction. Fasteners are 300 series stainless steel. |
| Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications. |
| Optical Assembly: Frosted tempered glass lens . Reflector is a stamped specular aluminum. |
| Lamping: 10W maximum T3 bi-pin lamp. Lower wattage lamps are acceptable. 10W T3 lamp is included with fixture. |
| Electrical Assembly: Bi-pin socket type (G4) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. |
| Installation & Mounting: Two (2) Stainless #8 wood screws (supplied) via key slots. |
| Warranty: Three-year limited warranty. |
| Certification: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. |
| Height: 3 1/2" (89mm) |
| Width: 3 1/2" (89mm) |
| Depth: 1 7/8" (48mm) |
| Max. Weight: 0.75 lb |
