Retail Price: $197.85
SALE PRICE: $152.19
 
Our Project Manager allows you to:
- Create multiple projects.
- Store contact information and billing addresses.
- Add & remove items as the vision of your project unfolds.
- Select "Request A Quote" and a customer service specialist will contact you about your project.
It is simple and free. All you need to do is create an account or login here.   
Questions? Call 1-800-239-2939
Mon—Fri, 8am—5pm CST
|
Sure Light - Red LED Exit Light Combo with Battery - LPX70RWHDH
Manufacturer:
Sure-Light
Item Number: RLLD2981SUR
The LPX Series Exit is an economical, yet attractive, alternative to metal exits. Its contemporary round corner styling, designer white finish, and consistent appearance enables it to blend with any decor. It's features include:
- Lamps - The LPX Series Exits with Heads use energy efficient, long life LED’s to provide uniform diffuse illumination of the exit face. The low operating costs and zero maintenance
requirement makes LED lamps the wisest choice for exit signs today. Emergency exit illumination is provided by LED lamps and the heads employ 6V, 5.4W DC incandescent
wedge base lamps.
- Housing Construction - Rugged, durable, injection molded polycarbonate materials are used throughout the LPX Series Exits with Heads. All structural components are designed with reinforcing ribs to add additional rigidity and to maximize structural integrity. These materials are impact and
scratch resistant, and they have been UV stabilized to resist discoloration due to age and ultraviolet radiation. All components are designed to be of snap-fit construction - no mechanical fasteners - to facilitate installation in under 5-minutes. Any components
required for installation (wirenuts, wire leads, universal metal J-box bracket, etc.) are all included with each exit. The universal design of the LPX Series Exits with Heads enables universal exits to be configured as single face or double face in the field. The LPX Series Exits with Heads can be wall, ceiling, or end mounted; a rugged, snap-fit, low profile canopy with captive screws is included with every exit for ceiling and end mounting applications.
- Lens - Lenses for the LPX Series Exits with Heads are made from durable impact resistant polycarbonate. All exit faces are designed with full 3/4” stroke snap-out or snap-in chevron directional indicators to insure maximum visibility and compliance with the latest codes.
- Line-Latched - Sure Lites’ line-latched electronic circuitry makes installation easy and economical. A labor efficient AC activated load switch prevents the lamps from turning on during installation to a non-energized AC circuit. Line-latching eliminates the need for a contractor’s return to a job site to connect the batteries when the building’s main power is turned on.
- Solid-State Charger - Supplied with a 120/277 VAC, voltage regulated solid-state charger. Immediately upon
restoration of AC current after a power failure, the charger provides a high charge rate. The charge circuit reacts to the condition of the battery and regulates the charging process
in order to maintain peak battery capacity and maximize battery life. Solid-state construction recharges the battery following a power failure in accordance with UL 924.
- Brownout Circuit - The brownout circuit on Sure-Lites’ exits monitors the flow of AC current to the exit and activates the emergency lighting system when a predetermined reduction of
AC power occurs. This dip in voltage will cause most ballasted fixtures to extinguish causing loss of normal lighting even though a total power failure has not occurred.
- Solid-State Transfer - The LPX Series Exits with Heads incorporates solid-state switching which eliminates
corroded and pitted contacts or mechanical failures associated with relays. The switching circuit is designed to detect a loss of AC voltage and automatically energizes the lamps using DC power. Upon restoration of AC power, the DC power will be disconnected and the charger will automatically recharge the battery.
- Low Voltage Disconnect - When the battery’s terminal voltage falls, the low voltage circuitry disconnects the
lighting load. The disconnect remains in effect until normal utility power is restored, preventing deep battery discharge.
- Test Switch/Power Indicator Light - A test switch located on the side of the exit permits the activation of the emergency circuit for a complete operational systems check. The Power Indicator Light
|
