Retail Price: $129.40
SALE PRICE: $99.54
 
Our Project Manager allows you to:
- Create multiple projects.
- Store contact information and billing addresses.
- Add & remove items as the vision of your project unfolds.
- Select "Request A Quote" and a customer service specialist will contact you about your project.
It is simple and free. All you need to do is create an account or login here.   
Questions? Call 1-800-239-2939
Mon—Fri, 8am—5pm CST
|
Sure Light - Red LED Exit Light with Battery - LPX70RWH
Manufacturer:
Sure-Light
Item Number: RLLD2980SUR
The LPX Series Exit is an economical, yet attractive, alternative to metal exits. Its contemporary round corner styling, designer white finish, and consistent appearance enables it to blend with any decor. It's features include:
- Lamps - Self-Powered LED versions of the LPX Series Exits use energy efficient, long life LED’s to provide uniform diffuse illumination of the exit face. These red LEDs require no maintenance and consume a total of 2.8 watts. The low operating costs and zero maintenance requirement makes LED lamps the wisest choice for exit signs today. Emergency illumination is provided by LED lamps.
- Housing Construction - Rugged, durable, injection molded polycarbonate materials are used throughout the LPX Series Exits. All structural components are designed with reinforcing ribs to add additional rigidity and to maximize structural integrity. These materials are impact and scratch resistant, and they have been UV stabilized to resist discoloration due to age and ultraviolet radiation. All components are designed to be of snap-fit construction - no mechanical fasteners - to facilitate installation in under 5-minutes. Any components required for installation
(wirenuts, wire leads, universal metal J-box bracket, etc.) are all included with each exit. The universal design of the LPX Series Exits enables universal exits to be configured as single face or double face in the field. All Self-Powered LPX Series Exits can be wall, ceiling, or end mounted.
- Lens - Lenses for Self-powered versions of the LPX Series Exits are made from durable impact resistant polycarbonate. All exit faces are designed with full 3/4” stroke snap-out or snap-in chevron directional indicators to insure maximum visibility and compliance with the latest codes.
- Line-Latched - Sure Lites’ line-latched electronic circuitry makes installation easy and economical. A labor efficient AC activated load switch prevents the lamps from turning
on during installation to a non-energized AC circuit. Line-latching eliminates the
need for a contractor’s return to a job site to connect the batteries when the building’s main power is turned on.
- Solid-State Charger - Supplied with a 120/277 VAC, voltage regulated solid-state charger. Immediately upon restoration of AC current after a power failure, the charger provides a high charge rate. The charge circuit reacts to the condition of the battery and regulates the charging process in order to maintain peak battery capacity and maximize battery life. Solid-state construction recharges the battery following a power failure in accordance with UL 924.
- Brownout Circuit - The brownout circuit on Sure-Lites’ exits monitors the flow of AC current to the exit and activates the emergency lighting system when a predetermined reduction of
AC power occurs. This dip in voltage will cause most ballasted fixtures to extinguish causing loss of normal lighting even though a total power failure has not occurred.
- Solid-State Transfer - The LPX Series Exit incorporates solid-state switching which eliminates corroded and pitted contacts or mechanical failures associated with relays. The switching circuit is designed to detect a loss of AC voltage and automatically energizes the
lamps using DC power. Upon restoration of AC power, the DC power will be disconnected and the charger will automatically recharge the battery.
- Low Voltage Disconnect - When the battery’s terminal voltage falls, the low voltage circuitry disconnects the lighting load. The disconnect remains in effect until normal utility power is restored, preventing deep battery discharge.
- Test Switch/Power Indicator Light - A test switch located on the side of the exit permits the activation of the emergency circuit for a complete operational systems check. The Power Indicator Light provides visual assurance that the AC power is on.
- Overload and Short Circuit Protection - The solid-state overload monitorin
|
