INFORMATION & HELPFUL LINKS


  • Bookmark This
  • Send to Friend
  • Print This

  • Questions?
    Call 1-800-239-2939
    Weekdays
    8:00AM — 5:00PM CST
    Closed Sat. – Sun.

    Disclaimer: ,

    Nutone Fans - Infrared Bulb Heaters One-Bulb Heat and Fan 9417DN


    Manufacturer: Nutone
    Item Number: RLLD3159NUT



    Its features include:

    • White-white polymeric grille
    • Sturdy steel housing
    • Adjustable mounting brackets that span up to 24"
    • Housing can be adjusted vertically after ceiling is finished
    • Uses 250W BR40-size infrared bulb (not included)
    • May be used with the following controls: Model 59W/V, 60-Minute Time Control; Model 61W/V, 15-Minute Time Control; Model 63W/V, 60-Minute Time Control w/ Toggle Switch; Model 64W/V, Heater-Fan Control w/Off Delay; Model 68W/V, Two-Function Control
    • Plug-in, permanently lubricated motor
    • Quiet, polymeric blower wheel
    • ceilings (Type I.C.) Polymeric damper/duct connector with 1-5/8" long tapered sleeve and no metallic clatter.
    • Heat and Vent functions may be controlled separately or in combination
    • Model 9417DN suitable for use in insulated ceilings (Type I.C.)
    • Note: For installation in ceilings up to 12/12 pitch.
    • Heater shall have corrosion resistant steel housing and adjustable mounting brackets.
    • Unit must use a 250W BR40-size infrared bulb. Bulb Heater to be U.L. Listed.
    • Motor assembly to be removable and permanently lubricated.
    • Non-metallic damper/duct connector to be included.
    • Nutone Fans, heater and ventilator to operate separately (or in combination).
    • Air delivery shall be no less than 70 CFM and sound level no greater than 3.5 Sones. All air and sound ratings shall be certified by HVI.
    • UL listed.

      click here for spec sheet and installation instructions


    Read what other customers had to say about this product:
    Nutone Fans - Infrared Bulb Heaters One-Bulb Heat
    Are these fans rated for damp areas? I forwarded your spec. sheet to my engineer, but he asked this question.... ( read more )
    Existing Heat lamp
    I am currently remodling a appartment complex in Il.We have an existing heat lamp we are leaving it is stamped nutone Model # 9401. My inspector ask for some info on the wattage of the light bulb that can be placed. I was hoping that you could e-mail me the info on this light. Thank you... ( read more )
    Nutone 2-bulb heater 9422P
    Need a Nutone heat lamp with one socket, is it available and where?... ( read more )
    ...