Retail Price: $56.63
SALE PRICE: $43.56

Disclaimer: ,

Its features include:

• White-white polymeric grille
• Sturdy steel housing
• Adjustable mounting brackets that span up to 24"
• Housing can be adjusted vertically after ceiling is finished
• Uses 250W BR40-size infrared bulb (not included)
• May be used with the following controls: Model 59W/V, 60-Minute Time Control; Model 61W/V, 15-Minute Time Control; Model 63W/V, 60-Minute Time Control w/ Toggle Switch; Model 64W/V, Heater-Fan Control w/Off Delay; Model 68W/V, Two-Function Control
• Plug-in, permanently lubricated motor
• Quiet, polymeric blower wheel
• ceilings (Type I.C.) Polymeric damper/duct connector with 1-5/8" long tapered sleeve and no metallic clatter.
• Heat and Vent functions may be controlled separately or in combination
• Model 9417DN suitable for use in insulated ceilings (Type I.C.)
• Note: For installation in ceilings up to 12/12 pitch.
• Heater shall have corrosion resistant steel housing and adjustable mounting brackets.
• Unit must use a 250W BR40-size infrared bulb. Bulb Heater to be U.L. Listed.
• Motor assembly to be removable and permanently lubricated.
• Non-metallic damper/duct connector to be included.
• Nutone Fans, heater and ventilator to operate separately (or in combination).
• Air delivery shall be no less than 70 CFM and sound level no greater than 3.5 Sones. All air and sound ratings shall be certified by HVI.
• UL listed.

  click here for spec sheet and installation instructions

Read what other customers had to say about this product:

Nutone Fans - Infrared Bulb Heaters One-Bulb Heat - 10/23/2006 Are these fans rated for damp areas? I forwarded your spec. sheet to my engineer, but he asked this ... ( read more )

Existing Heat lamp - 3/31/2006 I am currently remodling a appartment complex in Il.We have an existing heat lamp we are leaving it ... ( read more )

Nutone 2-bulb heater 9422P - 5/14/2005 Need a Nutone heat lamp with one socket, is it available and where?... ( read more )