Retail Price: $22.88
SALE PRICE: $17.60
 
Our Project Manager allows you to:
- Create multiple projects.
- Store contact information and billing addresses.
- Add & remove items as the vision of your project unfolds.
- Select "Request A Quote" and a customer service specialist will contact you about your project.
It is simple and free. All you need to do is create an account or login here.   
Questions? Call 1-800-239-2939
Mon—Fri, 8am—5pm CST
|
Lightolier Lights - 1102P1
Large New Construction Housing
Manufacturer:
Lightolier Lighting
Item Number: RLLD219LITL
1100 series universal, 120-volt new contruction rough in housing with thermal protection for non-insulated ceilings. A complete fixture consists of reflector trim and frame-in kit. Its features include:
6 3/4" Aperture Incandescent Frame_In Kit
Mounting Frame: .036" galvanized steel. Accommodates all ceilings up to 1" thick; including existing or inaccessible areas. P1M version has 3/8" deep integral plaster lip. Four slots are positioned 90 degree apart to simplify alignment, breakout section and anchor nails permit installation in existing ceiling from below. Push-in/twisted-out rotoclips hold reflector flush to ceiling.
Junction Box: 4"x3"1/2x2", .063 galvanized steel, U.L. listed for maximum of 8 #12gauge 75 degree Celcius through branch circuit conductors (60 degree Celcius for end of run). Integral cable clamps permit attachment of nonmetallic
Romex® or armored cable without need of additional connectors.
Mounting Bars: .059" galvanized steel. 13" long bars extend to 27", rotatable and lockable, with integral T-bar tabs. Attaches to wood joist or T-bar ceilings without need of accessories.
Socket Housing: impact extruded aluminum or galvanized steel.
Thermal protector: meets NEC and UL requirements. Insulation must be kept 3" away from fixture sides and wiring compartment and must not be placed above fixture in a manner which will entrap heat.
|
