Can these be hardwired and if so, can I wire two to the same switch?
Sure, these fluorescent lights can be hard wired to the same switch. In fact, these Alkco fluorescent lights have a buit in switch that will allow you to control them individually or collectively with a wall switch. In other words, once the wall switch is on sending power to the lights, you can switch off one or both of your lights if desired from the light fixture.
Labels: Fluorescent Fixtures, Task Lighting, Wall Switches
I have an outdoor awning that I want to light up using lighting mounted to the building then casting light up into the awning. Any suggestion on where I can find this type of lighting?
This is typically done using FLUORESCENT LIGHTING FIXTURES It may take several fixtures depending on the size of your awning.
We also have longer FLUORESCENT SIGN LIGHTING FIXTURES as well. These produce more light and would require fewer fixtures.
We look forward to assisting you here at Residential landscape Lighting & Design. Call us toll free at 800-239-2939 if we can give you a hand.
http://www.residential-landscape-lighting-design.com
Labels: Awning Lighting, Commercial Cannopy Lighting, Fluorescent Fixtures
We have a room that is about 50 foot square, and the ceiling is about 15 foot high. Could you tell me how many 2 X 4 three bulb fixtures would be needed to light this area? Thank You, Wm. ''Bill'' Noble
Well that depends on what you are doing in this room. I assume by your description that we are taking about a room that is 50' x 50' or 2500 square feet.
If that is the case, I would mount the PARABOLIC LAY-IN LIGHTING FIXTURES in rows approximately 8' to 10' apart in a uniform pattern. This will give you a tremendous light level for just about any task.
Thank you for contacting Residential Landscape Lighting & Design for your lighting question. We look forward to receiving your order and free to call us at 800-239-2939 should you have any other questions.
http://www.residential-landscape-lighting-design.com
Labels: Fluorescent Fixtures, Lay-In Lighting, Parabolic Lighting
Hi: I''m looking for flourescent fixtures for an outdoor area, and need two dual fixtures of this kind in a brownish or dark finish. Wattage 13 and up.Can you recommend? Thanks
The TECHLIGHT SRFPLSA-27 is a good little fluorescent flood fixture. You can get it in a bronze color and a glare shield as well. FYI - The picture has the wrong lamp, but the housing is the same. Thanks!
Labels: Backyard Lighting, Fluorescent Fixtures, Outdoor Lighting
I am installing new drop ceiling tiles at my office and need some new
FLUORESCENT FIXTURES to finish off the job. What is the cost and availability for 2' x 2' fixtures and 2' x 4' parabolic fixtures?
Both sizes of the lay-in fluorescent fixtures are in stock and their is very little difference in cost between the two. The
2' x 2' fixtures look better in smaller offices or in a ceiling with the same size tiles. They run about $70.00 or less.
Some of the features of this fixture include:Optional two 6" U-shaped T8 bulbs
Each bulb is 32Watts
9 louver cells
3" deep louvers
Computer-aided housing design allows for optimum
luminaire efficiency and visual comfort
Aluminum louver surfaces plated with anodized, semi-specular aluminum, low iridescent finish
Spring-loaded cam latches and die-formed T-hinges for louver insertion from either side
Floating door with black reveal
Removable louver seal eliminates dust build-up and protects lamps during installation
Housing constructed of structurally embossed heavy gauge, cold rolled steel
Access plate provides top access to wire way
UL/
CUL listed
All metal parts painted after fabrication following treatment with phosphate rust inhibitor
Finish coating of housing reflecting
surfaces with white, high reflectance polyester powder
The
2' x 4' parabolic fixtures produce more light and require fewer fixtures to light the space. They run about $80.
oo or less.
Some of the features of this fixture include:
Optional three 48" T8 bulbs
Each bulb is 32Watts, 4100K
18 louver cells
3" deep louvers
Computer-aided housing design allows for optimum
luminaire efficiency and visual comfort
Aluminum louver surfaces plated with anodized, semi-specular aluminum, low iridescent finish
Spring-loaded cam latches and die-formed T-hinges for louver insertion from either side
Floating door with black reveal
Removable louver seal eliminates dust build-up and protects lamps during installation
Housing constructed of structurally embossed heavy gauge, cold rolled steel
Access plate provides top access to wire way
UL/
CUL listed
All metal parts painted after fabrication following treatment with phosphate rust inhibitor
Finish coating of housing reflecting
surfaces with white, high reflectance polyester powder
In addition to parabolic fixtures we also have a great selection of
STANDARD FLUORESCENT FIXTURES in both sizes! Give a call toll free at 800-239-2939 for quantity discounts and overstock specials on
COMMERCIAL LIGHTING FIXTURES.
Labels: commercial lighting fixtures, Fluorescent Fixtures, Fluorescent Troffer Lights
