How long is the cord on your picture lights? Trying to decide where to locate the outlet box for it. New construction.
The cord is typically 6' or so. You should use a PICTURE LIGHT RECEPTACLE and center it behind the art. Use a wall switch to control the light in combination with a DIMMER CONTROL.
Thanks for shopping for ART LIGHTING FIXTURES at Residential Landscape Lighting & Design. We are here to assist you so please give us a call at 800-239-2939.
We have many PICTURE LIGHTS to choose from.
Thank you for contacting
Residential Landscape Lighting & Design. Please contact us at 1-800-239-2939 if you have any further questions.
Labels: Art Lighting Fixtures, Dimmer Control, Picture Light Receptacle
I am trying to light a piece of artwork that consists of a series of clear lexan boxes which contain mounted butterflies. There are 14 boxes arranged edge to edge so that the butterflies appear to be flying in a swarm. The problem arises with reflection of of the boxes. I need to illuminate the artwork from a severe angle from approx. 10''. I require the beam to be as focused as possible. I have tried MR16 low voltage bulbs in a variety of fixtures. Someone suggested an elongation lens for the MR16 as a solution. What does work is to extend the fixture so that the bulb is recessed approx 4" from the edge. Any thoughts you might have would be greatly appreciated.
The beam elongation and other MR16 LENSES are great at changing the shape and quality of the light on the wall. I can't help you with the reflection issues. I would buy one of each of the MR16 lenses and give them a try. Start with the beam elongation and soft focus lenses first. You might also buy a hex cell louver to prevent glare from the light source.
Thanks for contacting Residential Landscape Lighting & Design for your ART LIGHTING FIXTURE needs. We look forward to serving you. Give us a call toll free at 800-239-2939 if we can be of service.
http://www.residential-landscape-lighting-design.com
Labels: Art Lighting Fixtures, Lighting Accessories, MR16 Lenses
Several years ago I purchased a battery operated picture light for a painting in my living room. It has worked well until we purchased a larger painting that is 42" wide by 36" tall. I have contacted an electrician about adding a plug behind the art. How do I handle the cord behind the art where it plugs in?
Congratulations on your new painting and for moving on to an electrified
PICTURE LIGHT. You will be very pleased that you have moved up to a stronger light source. The plug that goes behind the art is called a
CLOCK PLUG. That is because the plug was originally designed for electric clocks
and by recessing the plug in the wall, the clock fit flush on the wall. This type of plug is commonly used for
ART LIGHTING FIXTURES.I would take a look at out
TRADITIONAL PICTURE LIGHTS or
SLIMLINE PICTURE LIGHT FIXTURES for your new larger art. Stick with something around 30" to 36" in width for best results.
Thanks for the question and enjoy your ne painting.
Labels: Art Lighting Fixtures, Battery Operated Picture Lights, Battery Powered Lights
