I have a haunted house and need a good motion swich but most stay on to long i need one that will shot off after 5 secones for my halloween props if you have them how much wood they cost by the case.

  Add to Favorites

The EXPERT recommends taking a look at the spec sheet for this product, which can be found by following this link: http://www.sensorswitch.com/o/products/WSD%20series/WSDlowres.pdf.

This wall mounted motion sensor switch is designed for use in Haunted Houses, Private Offices, Individual Bathrooms, Conference Rooms, Hallways & Stairwells (3-Way or 4-Way), or Janitor Closets. Its features include:

Small Motion Detection up to 20 Feet

Patented Bi-Polar Wiring - 2 Blk Wires

Intrinsically Grounded

Adjust Time Delay: 0.5 to 20 minutes

No Minimum Load

Green LED Activity Indicator

1/2-inch Fresnel Lens

Three-Way and Multi-Level Switching Compatibility

4.2”H x 1.8”W x 1.4”D

Mounting Height: 30 to 48 inches

Operating Temperature: 14° to 85 ° F

Relative Humidity: 20 to 90% non-condensing

Storage Temperature: -14° to 160° F

Electronic Ballast Rating at all Voltages: 800W

120 VAC @ 800 W

220/230/240/277 VAC @ 1200 W

347 VAC @ 1500W

Frequency: 50/60 Hz

Motor Load: 1/4 HP

Colors: White (WH), Ivory (IV), Almond (AL)

UL and CUL 3D62 Listed

Contact customer service for quantity pricing at 800-239-2939.  They will be glad to assist you!

  Add to Favorites