i have an attached picture light that is plugged into a receptical in the wall. there is no separate wall switch for this light. you turn it on via the little roller on/off switch attached to the cord. i am looking to be able to use a dimmer attachment and wondered if you can help. does this particular lamp dinner splice into the light cord and replaces the roller on/off switch?

  Add to Favorites

The Lutron lamp cord dimmer is designed to fit on a standard lamp cord and will most certainly work on your picture light.  There are no tools required as the wire is held in place by tabs.  If you don''t have room for the dimmer behind the art, you can always put it low on the cord near the plug.

  Add to Favorites