I must replace a 500 W "Nightscaping" (Loran Inc.) transformer. It has powered about 280 W of low voltage landscape lights. Since the transformer is mounted indoors, Malibu seems to be out because their FAQ says outdoors only. The old transformer has two sets of neutral and hot terminal blocks. I have a single run with the wires connected to one set of blocks and jumpers between the corresponding terminals on the other set. Please recommend a transformer (with photo on/off capability) and if it has two sets of terminal blocks should I connect them with jumpers as whoever installed the old transformer did.?

  Add to Favorites

Our TECHLIGHT 500W POWER SUPPLY is very similar to your Nightscaping transformer.  It has two circuits and can be controlled with a remote PHOTOCELL device.  This is a great little power supply that will give you years of satisfaction.

We have many other TRANSFORMERS, LIGHT FIXTURES and WIRE should you need any other OUTDOOR LIGHTING EQUIPMENT.

  Add to Favorites