Advanced Search
[ Help ]
You are not currently logged in.
You must have a user account to post or reply.
Click here to get create one.
<< Mercury vapor buzzing noise | Question about Rab - Motion Detector - Stealth200 >>

Question about 35 Watt High Pressure Sodum Mini Li

2/15/2006 6:45:27 PM
Tim Ramponi

2/15/2006 6:45:27 PM
I was reviewing your wall pack conversion table and am not sure what it is telling me.The image appears to reflect the text on the left which states this is the foot candle array at 8' height at a spacing of 6 to 1 and 2 mounting heights in front. How do I use the chart? It appears this is for the 50watt bulb and if I move the height up then my foot candle is the stated factor multiplied by the foot candles on the print.What about the text on the right for the 70Watt light? It mentions 3 heights in front, but the drawing only shows 2. Can you clarify for me.Thanks!

  Add to Favorites

re: Question about 35 Watt High Pressure Sodum Mini Li

Posted: 2/18/2006 10:10:06 AM

EXPERT

2/18/2006 10:10:06 AM

Thanks for the question.  Rather than go through some long winded technical explanation on WALL PACKS, I think it would be better if you faxed a drawing of the area you are lighting.  Send it to Jeremy's attention toll free at 877-272-0577.

Jeremy can then translate your design into a lighting layout and accurately answer your question as well as help you select the right fixture for the job.  Mounting heights and spacing vary by fixture type, wattage and beam pattern. We offer a full selection of SECURITY LIGHTING EQUIPMENT as well as COMMERCIAL LIGHTING PRODUCTS.

We appreciate your interest in Residential landscape lighting & Design products and welcome your call at 800-239-2939 for additional design assistance. 



  Add to Favorites
1-800-239-2939