Advanced Search
[ Help ]
You are not currently logged in.
You must have a user account to post or reply.
Click here to get create one.
<< Focus Lighting - Landscape Lighting Spot Light DL2 | Palm tree illumination - 360 degrees >>

Techlight - Statue Spot PAR64 TEC LSS1111

7/26/2006 8:45:39 PM
julio calderon

7/26/2006 8:45:39 PM
I need instructions on installing bulb into to spot light.  No instructions where sent in the box.

  Add to Favorites

re: Techlight - Statue Spot PAR64 TEC LSS1111

Posted: 7/31/2006 10:46:21 PM

EXPERT

7/31/2006 10:46:21 PM

Sorry about not sending instructions with the light.  The PAR64 spot light that you bought is a very powerful accent lighting fixture.  The bulb is held in place by the internal spring and the front lens cover.  Because of the heat generated by the light, it is important that it fit loosely.

Note: Since this is a 120 watt 6 volt light it operates at high amperage.  So you need to use a wire between the lamp and the transformer that will handle 20 amps of load.  That means you should use a #12 or even a #10 gauge wire to prevent failure.

I hope you enjoy your accent lighting fixture.



  Add to Favorites
1-800-239-2939