Do you have this in a 75W HPS unit for wall mounting? If not, suggest an alternative. We will require approx. 20 units
Check out our 70 WATT HIGH PRESSURE SODIUM WALL PACK. We have many other WALL PACKS to choose from.
I will have Jeremy in customer service give you a call to give you a quantity discount on 20 units.
Thanks for checking in with us here at Residential Landscape Lighting & Design. We look forward to serving you! Feel free to call us at 800-239-2929.
www.rlldesign.com
Labels: Commercial Lighting Products, Security Lighting Fixtures, Wall packs
I'd like to use this product for under cabinet kitchen lighting. I have j boxes in the wall and would like to use line voltage instead of fishing another low voltage wire through the wall. I have heard that there is a problem if these lights are used at less than 50% of rated load, that their life is shortened due to overpowering. Is this true? Is the product dimmable? What type of clamps or attachment devices are available? Thanks
ROPE LIGHT works well if dimmed. You can mount the lights with our ROPE LIGHT TRACK or ROPE LIGHT CLIPS. You can dim the product with a standard dimmer control.
Did you see our UNDER CABINET LIGHTS? These lights will be more attractive and functional than the rope light for task lighting.
www.rlldesign.com
Labels: Rope Lights, Track Lighting, Undercabinet Lighting
Are there any significant differences between low voltage & 110 volt halogen lighting? By low voltage, I mean the halogen lights that use a transformer to step down the 110 volt house current to a lower voltage, anywhere from 10 to 50 volts. Is the lower voltage primarily for safety, as in an outdoor location, or an indoor location that is wet? Alternatively, does lower voltage increase bulb life? Or possibly, is lower voltage employed to make it possible to use smaller light fixtures? If there is a longer expected bulb life with lower voltage, the additional cost of the transformer must be balanced against the savings of extended bulb life. Do you know of any published studies on the balance of cost and savings? I intend to install lights under the cabinets, in a kitchen. What do you recommend?
Low voltage lighting is a great way to have bright light and save energy. LOW VOLTAGE UNDER CABINET LIGHTS are low profile, and will give you years of enjoyment. Anytime you lower the wattage, you save on energy. This is true by just using a DIMMER CONTROL SWITCH. Dimming a light by 10% actually doubles the lamp life of a standard incandescent lamps. See our DIMMER FAQ'S for more information.
Just give us a call at 800-239-2939 and we can help you pick out a low voltage lighting system for your home.
www.rlldesign.com
Labels: Kitchen Lighting, low voltage lighting, Undercabinet Lights
I am planning to add landscape lighting this spring. I would like to up light 3 trees ranging from a 20 Ft color beach to an 8 Ft cherry tree. I also want to up light the corners of my house. I am not certain what wattage I should use? I don't want it too bright or too dim, I was thinking of purchasing a Malibu lighting system consisting of 4 50 watt spot lights? Is this too high a wattage? Suggestions?
You really don't need more than 20 or 35 watts per fixture for landscape lighting. Unless, you live near a street light or a parking lot with lot's of ambient lighting. Have you looked at out PRE PACKAGED OUTDOOR LIGHTING KITS? Everything you need comes in the box.
Thanks for the question and considering our products. Call us at 800-239-2939 if you are looking for a lighting kit that is not commercial grade or a little less money.
www.rlldesign.com
Labels: Landscape Lighting Kits, Low Voltage Lighting System, Outdoor Lighting
My lights tend to go off after being on for awhile. This is an intermittent problem. In the past I replaced one of the "transformers". I don't understand why the lights do this. They are not necessarily hot and they are only 7 years old and this has been going on for a long time. Anyway please tell me how to go about getting the replacement parts.
You either need REPLACEMENT SOCKETS or a REPLACEMENT ELECTRONIC TRANSFORMER. Check your existing socket carefully before ordering ours please! They all mount differently!
Give customer service a call at 800-239-2939 and they should be able to help you.
www.rlldesign.com
Labels: Electronic Transformers, Replacement Parts, Replacement Sockets
I need to install lighting control by way of photo cell. Is this the best idea or do you have other products better for this control?
Other than a MOTION DETECTOR or OCCUPANCY SENSOR the PHOTOCELL CONTROL is a great way to automatically control your outdoor lighting.
Thank you for your question and shopping with us today here at Residential Landscape Lighting & Design.
Call us at 800-239-2939 if we can be of further assistance.
ww.rlldesign.com
Labels: Motion Detector, Occupancy Sensor, Photocell Controls, Security Lighting
It is my understanding that you will no longer be able to manufacture MV ballasts after Jan. 1, 2008. Are you aware of any tax incentives available to customers with a large installed base of this lamp source? Or do they simply have to replace them all within a certain time frame because spare parts will no longer be available? Thanks in advance for your answer.
You can use a METAL HALIDE BALLAST on a mercury vapor lamp. Although the mercury vapor ballasts are being phased out, you can still get REPLACEMENT MERCURY VAPOR LAMPS.
Thanks for the great question. I am not aware of any tax incentives. Let us know if you need any spare parts or lighting fixtures.
www.rlldesign.com
Labels: HID Ballast, Mercury Vapor lamps, Replacement Bulbs
I am an electrical contractor with a need of a 277 volt to 12 volt transformer for an indoor application. Please call or e-mail. Thank you
Not a problem. Just contact Jeremy in customer service at 800-239-2939 and he can get you one.
Thanks for checking out our MAGNETIC TRANSFORMERS. We can also get ELECTRONIC TRANSFORMERS in 277 volt up to 300 watts if you prefer a smaller model.
We like electrical contractors and would like to earn your business. Thanks for shopping at Residential Landscape Lighting & Design.
www.rlldesign.com
Labels: Indoor and Home Lighting, Indoor Transformers, Step Lights
Is there a safe adapter to allow compact fluorescent to replace flood light bulbs in track lighting. The ones I have see say "for phenolic sockets only" or "for porcelain sockets only" Thanks for your help
Why not install a REFLECTOR STYLE FLUORESCENT LAMP in your track fixtures? We have many RETROFIT FLUORESCENT LIGHT BULBS to choose from.
Contact customer service for quantity discounts on large orders. Thanks for contacting Residential Landscape Lighting & Design.
www.rlldesign.com
Labels: Fluorescent Lamps, Retrofit Fluorescent Pictures, Track Lighting
We were referred to you by your customer service (phone) person. We are planning to use this product to provide overhead lighting on our patio (approximately total length = 53.5 feet). The design plan is a triangle that runs from the corner of the house (stucco over concrete block), to a palm tree, to a cleat mounted on aluminum frame of screen room, and back to the start (stucco over concrete block). Our question: Do you have suggestion(s) as to the best way to secure the start/end of the light string to the house. We were thinking a (boat) cleat, but thought you might offer a better option than wrapping the wire ends around a cleat. Also, with a custom length, is it possible to have a run of wire (from the plug to 1st light and from last light to wire end) without lights? Thank you.
Take a look at the porcelain aerial mounts in the electrical section at your local Home Depot or Lowes. They come in various sizes and mounting methods. These will give you a solid mount and a insulated mount as to isolate the aluminum structure from being entergized.
Since the sockets are molded you may have to splice the wire to accomplish your goals.
Thanks for shopping with us and we look forward to serving you.
www.rlldesign.com
Labels: Light String, Mounting Methods, Patio Lighting
Is there any conversion retrofit trim kit for a Lightolier 6" housing to a 3" halogen GU10? I know there are some on the market but some don''t fit the Lightolier brand as hooks are too short.
Lightolier has a 1000LV/1052 combination that will replace your 1003R housing. It is a 50-watt low voltage MR16 pin hole trim.
Contact customer service at 800-239-2939 for pricing and availability.
Thanks for shopping with us here at Residential Landscape Lighting & Design. We look forward to assisting you!
www.rlldesign.com
Labels: Low Voltage Lighting System, MR16 Fixture, Recessed Light Trims
Do you have spec sheets that you can email on your 20' commercial pole lighting kit?
Our product detail page pretty much covers everything. If you have a specific question please contact customer service at 800-239-2939.
We would be more than happy to create a lighting design and specifications for your project.
Thanks for looking at our COMMERCIAL LIGHTING FIXTURES here at Residential Landscape Lighting & Design.
We look forward to assisting you!
www.rlldesign.com
Labels: Commercial Lighting Fixtures, Parking Lot Lighting, Pole Light Kits
Hi-I am interested in hanging 10 lanterns in an olive tree and would like to light them. What is the best solution to light the lanterns and have them spaced far enough apart throughout the tree. I would also like the wire to be green so it blends in the tree. Any advice would be much appreciated. Thank you
Have you checked out out LOW VOLTAGE HANGING LIGHTS for the Olive tree? These low voltage lights have small perforations in the fixture to create a "Firefly" effect You will need a low voltage TRANSFORMER to power the lights. The wire is black in color and tends to blend with the tree.
Thanks for contacting Residential Landscape Lighting & Design. We look forward to helping you and feel free to call 800-239-2939 if we can be of service.
http://www.residential-landscape-lighting-design.com
Labels: Hanging Lights, Landscape Lighting Fixtures, Low Voltage Transformer
I have sloped ceiling which is part of the roof. Would like to retrofit recessed lighting into our den area. Need safe recessed housing to place in this area. What do you recommend?
It would be best to go with an IC rated sloped down light housing. Since you have no attic space, I am sure that the void is full on insulation. If you buy ones that is not IC rated, the lights will blink on and off. Please contact customer service for housing options at 800-239-2939.
www.rlldesign.com
Labels: IC rated Sloped Down Lights, Recessed Light Trims, Sloped Ceiling
I am planning on putting this light in a standard junction box. There are several wires going through this box that I can tap into. Will I need to put a transformer somewhere in the circuit? What kind? I noticed that two of the lamp options are 120V. Does this mean I can use these and tap into the circuit without a transformer? Also, in the lamp description is says the connection is FA-05. I am not sure what this is. Is this something I will need?Thanks!Dave
These FOCUS SL02 LIGHT will mount nicely on a standard junction box. In fact, the back box comes with the light fixture. We also have a cover plate in copper for a more attractive look.
The FA-05 is a low voltage connector that you will not need if you go with a 120 volt lamp. IF you go with a low voltage lamp, you will need a LOW VOLTAGE TRANSFORMER.
Thanks for checking in with us here at Residential Landscape Lighting & Design. Call us toll free at 800-239-2939 should you require further assistance.
http://www.residential-landscape-lighting-design.com
Labels: Landscape Lighting Products, Low Voltage Transformer, Outdoor Step Lights
How long is the cord? Can this fixture get wet? It will hang under an open arbor. Thank you
This fixtures comes shipped with a 6 foot cord unless you request otherwise. The JUSTICE RECTANGULAR HANGING PENDANT is rated for both damp and wet locations. So, it will work just fine in your arbor. It's a great looking fixture.
Thanks for shopping with Residential Landscape Lighting & Design. Give us a call at 800-239-2939 if you need assistance or just put your cord length in the comment box when ordering.
http://www.residential-landscape-lighting-design.com
Labels: Hanging Pendant Lights, Indoor and Home Lighting, Justice Design Group
I wanted to mount some recessed lights under my soffit outside. It is pretty protected from direct elements. Will the shower units work properly. Would there be any difference with line voltage or low voltage for this app. And finally are there any bulbs for these lights that would attract bugs any less then others since they will be outside. Thanks
Check out the AZIANO RECESSED 4" MR16 DOWN LIGHTS. They are sold in packages of 12 and are a great bargin. They can be dimmed for energy saving and extending lamp life. These 120 volt MR16 lamps have glass protective covers to shield them from the elements.
Thanks for shopping at Residential Landscape Lighting & Design. If we can help just give us a call toll free at 800-239-2939.
http://www.residential-landscape-lighting-design.com
Labels: MR16 Down Lights, Outdoor Lighting, Recessed Lights
Looking at your
FOCUS INDUSTRIES DL04 is it low voltage so I can use it with my existing landscape lighting?
Yes, the FOCUS DL04 is a low voltage landscape lighting fixture. You can select the wattage and voltage of the lamp you desire by using the options feature on the website.
Thank you for your question and shopping here at Residential Landscape Lighting & Design. Our FOCUS LANDSCAPE LIGHTS are in stock and ready to ship.
Give us a call toll free at 800-239-2939 if you need help with the order of installation of your new lighting fixture.
http://www.residential-landscape-lighting-design.com
Labels: Focus Lighting Products, Low Voltage Lighting System, Outdoor Landscape Lights
Hello, I would like to get the technical data sheet for these 1000-watt lights. I purchased them (along with poles and everything else) a few months ago from you. I am now setting them up and need to know the electrical wiring requirements to put the correct junction box, fuses, etc. Please email me all the technical data sheet and info you have on these lights. Thanks!
Thank you for purchasing one of our TENNIS COURT LIGHTING PACKAGES for your home. It would be best if you contacted a licensed electrician to assist you. Technically, we are not supposed to give you installation instruction for legal reasons. However, I can give you some useful information as you do your calculations.
Each 1000 watt fixtures pulls 4.5 amps if connected to a 220 volt circuit. That doubles to 9.o amps if you plan to use a 120 volt circuit. The ballasts in the fixtures have several taps that can be changed to accommodate your voltage selection.
I would go with the 220 volt system using #10 THHN wire and install 1" PVC conduit with sweep 90's between each pole and back to the panel location per side. That way you will have plenty of room to pull the wires and make the connections inside the poles. If you use several LIGHTING CONTACTORS to manage the circuits, you can have all the lights on one TIMER CONTROL or switch for simplicity.
If you purchased duplex receptacles in you kit for ball machines, those would be hooked up 120 volts and put on dedicated circuits.
Thanks again for shopping with us here at Residential Landscape Lighting & Design. Please tell your tennis friends about our exciting TENNIS COURT LIGHTS. Have them call us toll free at 800-239-2939 if we can be of assistance.
http://www.residential-landscape-lighting-design.com
Labels: Outdoor Lighting Packages, Tennis Court Lighting, Timer Control
Do these New Orleans gas lanterns offer "open flame"? I do not want to use mantles.
The NEW ORLEANS GAS LIGHTING FIXTURES are designed for open flames. They do not come with mantles. You can order glass chimneys if you want that look.
New Orleans gas lanterns are just one of the many DECORATIVE OUTDOOR WALL LANTERNS we offer. Whether you are looking for traditional or contemporary styles, we have many to choose from.
Thanks for the question and we look forward to assisting you with your order here at Residential Landscape Lighting & Design. We can be reached toll free at 800-239-2939 if you have any further questions.
http://www.residential-landscape-lighting-design.com
Labels: New Orleans Gas Lanterns, Outdoor Decorative Wall Sconce, Outdoor Wall Lanterns
I was wondering about any type of employment or franchising would be available to a recently graduated Electrical and Electronics Engineer with a great deal of creativity and knowledge to offer
Yes, please fax your resume to our toll free fax: 877-272-0577. Someone in human resources will be contacting you after reviewing your information.
We are always looking for motivated individuals such as yourself to join our team of professionals at Residential Landscape Lighting & Design. As one of the web's largest online lighting super stores, we can always use qualified people for data entry, sales, customer service and the lighting design department.
Thanks for asking about employment at RLLD and we look forward to speaking with you soon!
Labels: Electronics Engineer, Employment Opportunities, Residential Landscape Lighting and Design
Can a fixture like this or any other chandelier be hung centered over a bathtub?
The National electric code officially says that any light fixture must be installed over 6' high, out of reach and connected to a GFCI receptacle They do not want you to be able to touch the fixture while standing in the tub.
I see CHANDELIERS hung over tubs in bathrooms all the time. It's a great look and really adds a touch of class to any master bathroom.
We appreciate you visiting Residential Landscape Lighting & Design today. Please call us at 800-239-2939 if you need help selecting a CRYSTAL BATHROOM CHANDELIER.
http://www.residential-landscape-lighting-design.com
Labels: Bathroom Lighting, Chandelier Lighting Fixtures, Indoor and Home Lighting
Just looking & pricing a few different sites. What size gooseneck lamp would I need to light my exterior sign?Size of sign: 36" x 134".
I would use 3-4 GOOSENECK LIGHTING FIXTURES depending on your budget. If you go with four gooseneck sign lights you will have nice uniformity and coverage. These lights good great on any architecture and you can select a color to match or compliment the building. We even have a galvanized option if you so desire.
Thanks for shopping at Residential Landscape Lighting & Design. Wee look forward to helping you and feel free to call 800-239-2939 for more information.
http://www.residential-landscape-lighting-design.com
Labels: Commercial Lighting Fixtures, Gooseneck Lighting Fixtures, Outdoor Pole Lights
We would like to install low voltage lights on the eves over the garage door and on one side pathway.What can you recommend for us? Thank you in advance fro your kind reply.
I would take a look at the AZIANO MR16 DOWNLIGHTS for eve lighting around your house. They are line voltage which means you don't have to fool with a transformer. They can be dimmed with a LUTRON INCANDESCENT SWITCH for setting the light level and saving energy. And the best reason is they are very inexpensive and sold in twelve packs! The MR16 lamp is included as well.
We also have some LOW VOLTAGE RECESSED LIGHTS FROM LITON that would work as well.
Thanks for shopping at Residential Landscape Lighting & Design. We look forward to assisting you. Give us a call toll free at 800-239-2939 if we can help!
http://www.residential-landscape-lighting-design.com
Labels: Dimmer Switch, Low Voltage Lighting System, MR16 Down Lights
Is there such a product as a low pressure sodium lamp wall mount light?
You are looking for a COMMERCIAL WALL PACK LIGHT. We have many HIGH PRESSURE SODIUM WALL PACKS and VANDALPROOF LIGHTING FIXTURES.
Contact Jeremy in customer service at 800-239-2939 for a quantity discount.
Thanks for shopping at Residential Landscape Lighting & Design for all your COMMERCIAL LIGHTING PRODUCTS.
http://www.residential-landscape-lighting-design.com
Labels: Commercial Lighting, HID Wall Pack, Vandalproof Lighting Fixtures
Do the line in circuits have to be in same phase in breaker panel if there is more than one circuit in power booster as well as control from module panel?
Please contact LUTRON TECHNICAL SUPPORT directly for that question. Lutron's toll free number is 1-800-523-9466.
Thanks for contacting Residential Landscape Lighting & Design. We carry many LUTRON DIMMER SWITCHES and HOME AUTOMATION products.
Call us toll free at 800-239-2939 for assistance with your order.
http://www.residential-landscape-lighting-design.com/
Labels: Home Automation Products, Lutron Dimmer Switches, Technical Support
Our company will be purchasing several of these lights but would first like to get a photometric readout for the two 250 watt, two 400 watt, and two 1000 watt fixtures. Can these be provided?
Yes, we can certainly provide you a photometric point by point analysis of your horse area using several wattage fixtures. Please fax a detailed drawing of your horse area with dimensions, pole locations and pole heights to 877-272-0577. This is a toll free fax number for your convenience.
Residential Landscape Lighting & Design is committed to helping you have the best OUTDOOR LIGHTING. We can be reached toll free at 800-239-2939 if you have any questions. Ask for Gabby in customer service.
http://www.residential-landscape-lighting-design.com
Labels: Horse Arena Lighting, Outdoor Landscape Specialties, Outdoor Lighting
I need a spec sheet. I have to have separate gas valves and the only place to put them is in the wall. I was thinking of putting a 4" PVC pipe around the valve in the brick. Will the mounting plate cover the pipe? I''m not sure what mount comes with the lantern.
Thanks for considering our NEW ORLEANS GAS LIGHTS for your home. The wall mounting plate should cover the 4" pipe but may interfere with the mounting screws. However, the gas light manufacturer will customize a back plate and provide technical assistance if you need some help.
Give Gabby a call in customer service at 800-239-2939 for assistance. She can relay your information and get you a custom quote.
http://www.residential-landscape-lighting-design.com
Labels: Decorative Wall Mount Outdoor Light Fixture, Mounting Plate Cover, New Orleans Gas Lights
I currently use 75W incandescent regular 120V flood lights to
up light trees. What equivalent low voltage light would I need to achieve the same level of
lumens? Would halogen
LV lights be a better choice? I like the color of the incandescent bulbs and think the halogen might be too white but I am afraid the low voltage spot lights with incandescent bulbs might not give enough light. Can you make a recommendation? Thanks
Do not be fooled by the term low voltage lighting fixtures. LOW VOLTAGE HALOGEN FIXTURES can produce tremendous light levels in a garden setting. 50-watt MR16 lamps are equivalents to 150-watt standard incandescent lamps. The 50MR16/FNV is a wide spread 60 degree spread lamp. Just ask customer service to include those in the kit.
Low voltage lighting is a great way to light homes, trees and plants. The small powerful fixtures are easy to install and easy to move as the plant material matures.
Thanks for shopping at Residential Landscape Lighting & Design for your OUTDOOR LIGHTING FIXTURES. Give us a call toll free 800-239-2939 if we can help.
http://www.residential-landscape-lighting-design.com
Labels: Incandescent Bulb, Low Voltage Halogen Fixtures, Outdoor Lighting Fixtures
I am wanting to install a motion detector for my kitchen cabinet lights, but I would like to override this via the light switch so the lights do not go on and off when somebody leaves the kitchen for a short while as this would aggravate my wife. Does your product meet my needs ? With thanks
I do not think having a motion detector on the kitchen lights is such a great idea. Have you considered using a WALL MOUNT TIMER as a easy solution? They come in several duration styles with and without a hold feature. Your wife will love it!
We also have MOTION DETECTORS and OCCUPANCY SENSORS here at Residential Landscape Lighting & Design. Call us at 800-239-2939 toll free for more information. Did you see our MOTION ACTIVATED TASK LIGHTS? They are pretty cool!
http://www.residential-landscape-lighting-design.com/
Labels: Kitchen Lighting Motion Sensor, Motion Detector, Occupancy Sensor, Wall Mounted Timer
I am a student at Georgia Institute of Technology and we are holding an outdoor event at night. We have about 70 feet worth of walkway that will need to be lit up. We actually do not want it to be too bright because we are going for a night festival look. How do you power this light or plug it in? I was wondering how many of the lights you think I would need to light up this area. Or if there is another type of light fixture you would recommend. We do not have a lot of money for this so the cheaper the better. Thanks.
Take a look at our TEMPORARY HALOGEN LIGHTING FIXTURES for your festival needs. These portable work lights are perfect for this kind of application and come with a stand and wire guard for safety.
We also have TOWER WORK LIGHTS if you want to hide them in the bushes or raise them up for more coverage.
These are very inexpensive and come with everything you need including the halogen lamp.
Labels: Portable Work Lights, Temporary Halogen Lighting Fixture, Tower Work Lights
I am interested in using this product in an upcoming bathroom renovation. Planning on mounting directly to exterior wall, however i was wondering if there is a mounting kit available for the screen outside. This is a high end job and i need it to look better than a piece of plastic screwed and caulked to siding. In the past i have cut a piece of either poplar or primed FJP and cut the vent stack hole in it the mounted the bird screen to that . Then you have to install channel around that (if vinyl or aluminum) This method looks decent after being painted but its one more thing to maintain (paint wise) and customers like this are not interested in that. Maybe there is an additional product i can buy to maybe add a nicer look to it? Any advice would be appreciated THANK YOU
The PANASONIC OUTDOOR VENT cover does include a bird screen. Unfortunately, there is not a good looking outside vent cover. If you decide to make your own just be sure you provide enough holes not to restrict the flow of air.
Labels: Bathroom Mounting Kit, Panasonic Outdoor Vent, Whisper Wall Exhaust Fan Cover
Can you use 2 of your motion detector lights on the same switch? The Cooper lights I bought do not work properly and they instruct not to put 2 lights on the same switch, but I have no choice on my outdoor floodlights. Thanks
I would have to see a diagram on how the lights are wired to answer your question. If you have two lights on one MOTION DETECTOR that is certainly alright as long as they are not HID lights. If you have halogen or incandescent lamps it should work fine.
Otherwise, you would need one motion detector per switch leg to control your outside lights.
Thanks for the question and shopping at Residential Landscape Lighting & Design. Call us toll free at 800-239-2939 if we can be of further assistance.
http://www.residential-landscape-lighting-design.com/
Labels: Control of Outside Lights, Motion Detector, Outdoor Flood Lights
I'm interested in Phantom lighting for use in a continuous cove about 29 feet long. I need to know the
lumen's output and lifetime of the various lamp choices. Also, I need to have a description of the various trim and wiring options. (Maybe they're on your website, but I couldn't find them.
Please visit www.phantomlighting.com for more specific information. Everything you have requested can be found on the manufacturer's web site.
I would go with the Xenon lamp for color rendering and lamp life. When used in combination with a magnetic dimmer controls, the Phantom lamps will last for years. If you spacing is 4" on center and you select 5 watt lamps, you will produce 15 watts per foot. Likewise, with 10 watt lamps, you will produce 30 watts per foot. PHANTOM LIGHTING STRIPS are custom built to your exact dimensions so they fit your cove the first time!
Thanks for the question and we look forward to assisting you here at Residential Landscape Lighting & Design. Call us toll free at 800-239-2939 if we can be of assistance.
http://www.residential-landscape-lighting-design.com
Labels: Indirect Lighting Source, Phantom Cove Lights, Phantom Lighting Strips, Xenon Lamps
My outdoor arena is 150' x 80'. I would like to install only two poles on the 150' side of the arena with two lights each. Would two 400 watt metal halide fixtures on each pole mounted at 17' high be sufficient for horse jumping at night? Any suggestions?
Nope! It would be better if you installed taller poles, say 25' and four 1000 WATT COMMERCIAL MH FIXTURES instead of four 400 WATT MH FIXTURES. However, if you already have the 17' poles, stick with the 400 watt fixtures.
Since you are only using four lights, I feel that you will need higher light levels for jumping safely at night. The higher the poles the less glare you will have in your eyes when jumping or riding.
Please contact Jeremy in customer service at 800-239-2939 for assistance on COMMERCIAL LIGHTING FIXTURES. He can quote you the right forward throw 1000 watt metal halide fixtures with pole mount brackets.
Thanks for shopping at Residential Landscape Lighting & Design. We look forward to assisting you with your horse arena lighting package.
http://www.residential-landscape-lighting-design.com
Labels: Commercial Lighting Fixture, Commercial Metal Halide Fixture, Horse Arena Lighting
I need to understand how this fixture works. What is the Focus FA-24-Brass canopy? For Tubing Post options, what does Brass PVC mean? Can I get a spec sheet for this fixture? Thank you.
The copy on the website details the features of the FOCUS AL08 ALUMINUM BOLLARD FIXTURE with the powder coat paint finish. However, the picture is illustrating the brass tube with the PVC mounting stake. Sorry for the confusion. Hope this helps.
Please contact customer service at 800-239-2939 for information on FOCUS LIGHTING FIXTURES. We look forward to assisting you here at Residential Landscape Lighting & Design.
http://www.residential-landscape-lighting-design.com
Labels: Aluminum Bollard Fixture, Focus Fixture Specs, Focus Lighting Fixtures
What is the difference between the Advance Transformer model number 71A3072-001D and 71A3002-510D? Do you have dimension and wiring specs on this product?
Here is a link to ADVANCE 71A3002-510D BALLAST illustrating the 175 watt mercury vapor ballast wiring diagram you requested.
Here is a link to ADVANCE 713072-001D REPLACEMENT MERCURY VAPOR BALLAST illustrating the wiring instructions you requested.
The only difference between the two mercury vapor ballast is the 713072 is a 120 volt and the 713002 is a quad-tap ballast with 120, 240, 277 and 480 volt taps. ADVANCE TRANSFORMERS are some of the best magnetic ballasts on the market.
Thanks for asking the great question. I had to look that one up myself. Everyone at Residential Landscape Lighting & Design are here to help. So give us a call at 800-239-2939 if we can help with your OUTDOOR LANDSCAPE LIGHTING PROJECT.
http://www.residential-landscape-lighting-design.com/
Labels: Advance Ballast, Advance Transformer, Replacement Mercury Vapor Ballast
Can you send me the tech specs on your halo recessed lighting products? Grateful in advance.
We have many HALO LIGHTING PRODUCTS to choose from. Please be more specific as they have a large lighting fixture package. I would like to provide you the right information you are looking for.
Please call customer service at 800-239-2939 for more specific information. We are delighted that you have contacted Residential Landscape Lighting & Design for your RESIDENTIAL INTERIOR LIGHTING FIXTURES.
We look forward to serving you!
http://www.residential-landscape-lighting-design.com
Labels: Halo Downlights, Halo Recessed Lighting, Residental Interior Lighting
I have two trees in the front yard that have dual bullet
down lights using 60 watt PAR 20 bulbs - poor color and frequent burnouts. Thinking of going to 50 watt R20 mercury vapor lamps for more natural color and longer bulb life. Can I just swap out a
Techlight fixture and ballast unit, or can I use the existing ballast and fixture? Are R20 bulbs the correct size (new home with new 20 foot trees)? Thanks -
I like the idea of replacing the existing incandescent bullet fixtures with our TECHLIGHT 50WATT MERCURY VAPOR DOWN LIGHTS. Not only will you extend the lamp life to 16,000 hours but, you will love the color of the lights. The extended glare shield allows you to adjust the mercury vapor tree lights towards the house without seeing the light bulb or creating glare. I always use mercury vapor tree lighting to create artificial moonlight illumination. The soft shadows look very nice creeping across the lawn. If you mount the lights over 30' high, go with a 100 WATT MERCURY VAPOR TREE LIGHT KIT or 175 WATT MERCURY VAPOR TREE LIGHTING FIXTURE.
I would recommend that you remote the ballast box for a cleaner look. Hide the BALLAST BOX over in the bushes or out of your normal view up to 100'. You will need some 16/3 LANDSCAPE CABLE to complete the installation.
Thank you for contacting Residential Landscape Lighting & Design for all your OUTDOOR LANDSCAPE LIGHTING needs. Please give customer service a call toll free at 800-239-2939 if you need help selecting your lighting products.
http://www.residential-landscape-lighting-design.com
