Low voltage lighting layouts, designing low voltage circuits and 12 volt wiring information.

Do you have a product that can combine 2 low voltage circuit into one such that I can use a single circuit transformer? I understand the capacity of the transformer has to be big enough for the combined load. Thanks.

All of our TRANSFORMERS have a 25-amp circuit breaker per circuit. You can combine several feeds under one lug as long as you don''t exceed 300 watts. (300 watts divided by 12 volts equals 25 amps) Check out our DESIGNING LOW VOLTAGE LIGHTING SYSTEMS information page. I would recommend that you have at least 12/2 LANDSCAPE CABLE on each of your lighting runs.

Labels: Landscape Cable, Low Voltage Lighting, Low Voltage Transformers

posted by xinger @ 7:39 PM